- �(shí)間:2021-12-07 14:15:13
- 來源:本�
- 瀏覽次數�499
PC薄膜片材可以說是一種無定型以及無臭、無毒和高度透明的無色或者是微黃色的熱塑性工程塑�,PC薄膜的片材應用得非常廣泛,主要是用在�(jī)械以及電�,汽車以及建筑和生活用品等領�,它通常具備有下面所說的特點�
PC film can be said to be a kind of amorphous, odorless, non-toxic and highly transparent colorless or slightly yellow engineering plastics thermoplastic sheet, PC thin films are widely used, is mainly used in machinery and electronics, automobile and construction and daily necessities, it usually has the following characteristics say:
1.PC薄膜具備有優良的一種物理機械的性能�
1.PC thin film has excellent physical and mechanical properties.
2.耐沖擊性比較優秀,拉伸強度以及彎曲強�、壓縮的�(qiáng)度比較高;蠕變性較�,尺寸相�(duì)來講比較�(wěn)��
2 excellent impact resistance, tensile strength and bending strength, compression strength is relatively high; creep is small, the size is relatively stable.
3.它具備有比較良好的耐熱性達�125度以及耐低溫性的零下45�,在比較寬的溫度范圍�(dāng)中具備有著穩定的一種力�(xué)性能,另外尺寸的�(wěn)定性,電性能和阻燃�,可以在-60�120度下面長期的�(jìn)行使�;沒有明顯熔點,在220�230度的呈熔融狀�(tài);�?yàn)榉肿渔湹膭傂源螅约皹渲娜垠w粘度比較��
3 it has good heat resistance and low temperature resistance up to 125 degrees 45 degrees below zero, in the relatively wide temperature range has a stable mechanical properties, and size stability, electrical properties and flame retardant properties, can be -60 to 120 degrees below the long-term use; no obvious melting point in the molten state, is 220 to 230 degrees; because of the rigidity of the molecular chain, and the melt viscosity of resin is relatively large.
4.吸水率較小,收縮率小以及尺寸的精度較�,尺寸穩定性比較好以及薄膜透氣性小;屬于是一種自熄性的材料;
4 the water absorption rate is small, the shrinkage rate is small and the precision of the dimension is high, the dimensional stability is good, and the permeability of the film is small;
5.�(duì)于光的穩定,但是pc薄膜不耐紫外光,耐候性相�(duì)比較�;耐油以及耐酸、不耐強堿和氧化性酸及胺、酮�,溶過氯化烴類與芳香族溶�,長期在水里面比較容易引起水解以及開�,缺�(diǎn)就是�?yàn)榭蛊诘�?qiáng)度比較差,容易產生一種應力開�,抗溶劑的性能�,耐磨性也欠佳�
5 for light stability, but the PC film is UV resistant, weather resistance is relatively good; oil resistance and acid resistance, alkali resistance and non oxidizing acids and amines, ketones, aromatic hydrocarbons and soluble chloride solvent, long in the water are prone to hydrolysis and cracking, it is because of the disadvantages of anti fatigue strength poor, easy to produce a stress cracking resistance, solvent resistance is poor, poor.